Port Enable - TP-Link TL-SL5428E User Manual

C VLAN:
SP VLAN:
Description:
VLAN Mapping Table
C VLAN Select:
Select:
Operation:

8.4.3 Port Enable

On this page, you can enable the port for the VLAN Mapping function. Only the port is enabled,
can the configured VLAN Mapping function take effect.
Select your desired port for VLAN Mapping function. All the ports are disabled for VLAN Mapping
function by default.
Note:
When VPN mode is globally enabled, VPN function takes effect on all ports. If VPN mode is
disabled, VLAN Mapping function can be enabled by selecting your desired port on this Port
Enable page.
Configuration Procedure of VLAN VPN Function:
Step Operation
1 Enable VPN mode.
2 Configure the global TPID.
3 Set the VPN up-link port.
Enter the ID number of the Customer VLAN. C VLAN refers to the
VLAN to which the packet received by switch belongs.
Enter the ID number of the Service Provider VLAN.
Give a description to the VLAN Mapping entry or leave it blank.
Click the Select button to quick-select the corresponding entry
based on the C VLAN ID you entered.
Select the desired entry to delete the corresponding VLAN
Mapping entry. It is multi-optional.
Click the Edit button to modify the settings of the entry and click
the Modify button to apply.
Figure 8-14 Enable VLAN Mapping for Port
Description
Required. On the VLAN→VLAN VPN→VPN Config page,
enable the VPN mode.
Optional. On the VLAN→VLAN VPN→VPN Config page,
configure the global TPID basing on the devices connected
to the up-link port.
Required. On the VLAN→VLAN VPN→VPN Config page,
specify the desired port to be the VPN up-link port. It's
71