9.4.2 TC Protect
When TC Protect is enabled for the port on Port Protect page, the TC threshold and TC protect
cycle need to be configured on this page.
Choose the menu Spanning Tree→STP Security→TC Protect to load the following page.
The following entries are displayed on this screen:
TC Protect
TC Threshold:
TC Protect Cycle:
Figure 9-11 TC Protect
Enter a number from 1 to 100. It is the maximum number of the
TC-BPDUs received by the switch in a TC Protect Cycle. The
default value is 20.
Enter a value from 1 to 10 to specify the TC Protect Cycle. The
default value is 5.
93