TP-Link TL-SL5428E User Manual page 218
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
Port 1 of the commander switch is connecting to the external network, port 2 is connecting to
member switch 1 and port 3 is connecting to member switch 2.
IP pool: 192.168.0.1, Mask: 255.255.255.0.
Network Diagram
Configuration Procedure
Configure the member switch
Step Operation
1
Enable NDP function on the
switch and for port 1
2
Enable NTDP function on the
switch and for port 1
Configure the commander switch
Step Operation
1
Enable NDP function on the
switch and for port 1, port 2 and
port 3
2
Enable NTDP function on the
switch and for port 1, port 2 and
port 3
3
Create a cluster and configure
the related parameters
Figure 13-19 Network diagram
Description
On Cluster→NDP→NDP Config page, enable NDP
function.
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
Description
On Cluster→NDP→NDP Config page, enable NDP
function.
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
On Cluster→Cluster→Cluster Config page, configure
the role as Commander and enter the related
information.
IP pool: 192.168.0.1
Mask: 255.255.255.0
210
Advertisement
Table of Contents
