TP-Link TL-SL5428E User Manual page 112

Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
VLAN Config
VLAN ID:
Router Port Time:
Member Port Time:
Leave Time:
Static Router Port:
VLAN Table
VLAN ID Select:
Figure 10-6 VLAN Config
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router port,
it will consider this port is not a router port any more.
Specify the aging time of the member port. Within this time, if the
switch doesn't receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Specify the interval between the switch receiving a leave message
from a host and the switch removing the host from the multicast
groups.
Select the static router port which is mainly used in the network
with stable topology.
Click the Select button to quick-select the corresponding VLAN ID
based on the ID number you entered.
104