Vlan Mapping - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
VPN Mode:
Global TPID:
VPN Up-link Ports
Select the desired port as the VPN Up-link port. It's required to set the port connected to the
operators' backbone networks to be up-link port.
Note:
If VPN mode is enabled, please create VLAN Mapping entries on the VLAN Mapping function
page.
8.4.2 VLAN Mapping
VLAN Mapping function allows the VLAN TAG of the packets to be replaced with the new VLAN
TAG according to the VLAN Mapping entries. And these packets can be forwarded in the new
VLAN. If VLAN VPN function is enabled, a received packet already carrying a VLAN tag will be
tagged basing on the VLAN Mapping entries and becomes a double-tagged packet to be
forwarded in the new VLAN.
Choose the menu "VLAN→VLAN VPN→VLAN Mapping" to load the following page.
The following entries are displayed on this screen:
VLAN Mapping Config
Allows you to Enable/Disable the VLAN-VPN function.
Enter the global TPID (Tag protocol identifier).
Figure 8-13 Create VLAN Mapping Entry
70
Advertisement
Table of Contents
