Appearance Description; Front Panel - TP-Link TL-SL5428E User Manual

+ Supports Telnet, CLI, SNMP v1/v2c/v3, RMON and web access.
+ Port Mirroring enables monitoring selected ingress/egress traffic.

2.3 Appearance Description

2.3.1 Front Panel

The following parts are located on the front panel of the Switch:
10/100Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps or
100Mbps. Each has a corresponding 10/100Mbps LED.
10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps,
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED.
SFP Ports: Designed to install the SFP module. SFP1 shares the same LED with Port 27 and
SFP shares the same LED with Port 28.
Console Port: Designed to connect with the serial port of a computer or terminal for monitoring
and configuring the Switch.
LEDs
Name Status
PWR
SYS
10/100Mb
ps
1000Mbp
s
Figure 2-1 Front Panel
On Power is on.
Flashing Power supply is abnormal.
Off Power is off or power supply is abnormal.
On The Switch is working abnormally.
Flashing The Switch is working normally.
Off The Switch is working abnormally.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 100Mbps.
Yellow The linked device is running at 10Mbps.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 1000Mbps.
Yellow The linked device is running at 10/100Mbps.
Indication
7