Vlan Vpn - TP-Link TL-SL5428E User Manual

Configuration Procedure:
Step Operation
1 Set the link type for port.
2 Create VLAN.
3 Create Protocol Template.
4 Select your desired ports for
Protocol VLAN feature.
5 Create Protocol VLAN.
6 Modify/View VLAN.
7 Delete VLAN.

8.4 VLAN VPN

With the increasing application of the Internet, the VPN (Virtual Private Network) technology is
developed and used to establish the private network through the operators' backbone networks.
VLAN-VPN (Virtual Private Network) function, the implement of a simple and flexible Layer 2 VPN
technology, allows the packets with VLAN tags of private networks to be encapsulated with VLAN
tags of public networks at the network access terminal of the Internet Service Provider. And these
packets will be transmitted with double-tag across the public networks.
The VLAN-VPN function provides you with the following benefits:
（1） Provides simple Layer 2 VPN solutions for small-sized MANs or intranets.
（2） Saves public network VLAN ID resource.
（3） You can have VLAN IDs of your own, which is independent of public network VLAN IDs.
（4） When the network of the Internet Service Provider is upgraded, the user's network with a
relative independence can still work normally without changing the current configurations.
In addition, the switch supports the feature to adjust the TPID Values of VLAN VPN Packets. TPID
(Tag Protocol Identifier) is a filed of the VLAN tag. IEEE 802.1Q specifies the value of TPID to be
0x8100. This switch adopts the default value of TPID (0x8100) defined by the protocol. Other
manufacturers use other TPID values (such as 0x9100 or 0x9200) in the outer tags of VLAN-VPN
packets. To be compatible with devices coming from other manufacturers, this switch can adjust
the TPID values of VLAN-VPN packets globally. You can configure TPID values by yourself. When
Description
Required. On the VLAN→802.1Q VLAN→Port Config
page, set the link type for the port basing on its connected
device.
Required. On the VLAN→802.1Q VLAN→VLAN Config
page, click the Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
Required. On the VLAN→Protocol VLAN→Protocol
Template page, create the Protocol Template before
configuring Protocol VLAN.
Required. On the VLAN→Protocol VLAN→Port Enable
page, select and enable the desired ports for Protocol
VLAN feature.
Required. On the VLAN→Protocol VLAN→Protocol
VLAN page, select the protocol type and enter the VLAN ID
to create a Protocol VLAN.
Optional. On the VLAN→Protocol VLAN→Protocol VLAN
page, click the Edit button to modify/view the information of
the corresponding VLAN.
Optional. On the VLAN→Protocol VLAN→Protocol VLAN
page, select the desired entry to delete the corresponding
VLAN by clicking the Delete button.
68