Extend-Ip Acl - TP-Link TL-SL5428E User Manual

Time-Range:

12.2.5 Extend-IP ACL

Extend-IP ACLs analyze and process data packets based on a series of match conditions, which
can be the source IP addresses, destination IP addresses, IP protocol and other information of this
sort carried in the packets.
Choose the menu ACL→ACL Config→Extend-IP ACL to load the following page.
The following entries are displayed on this screen:
Create Extend-IP ACL
ACL ID:
Rule ID:
Operation:
Fragment:
S-IP:
Select the time-range for the rule to take effect.
Figure12-8 Create Extend-IP Rule
Select the desired Extend-IP ACL for configuration.
Enter the rule ID.
Select the operation for the switch to process packets which match the
rules.
Permit: Forward packets.
Deny: Discard Packets.
Select if the rule will take effect on the fragment packets. When the
fragment is selected, this rule will process all the fragments and the last
piece of fragment will be always forwarded.
Enter the source IP address contained in the rule.
137
1