TP-Link TL-SL5428E User Manual page 53

Priority will be considered as the preferred one. If the two port priorities are equal; the port with
smaller port number is preferred.
On this page, you can configure the LACP feature of the switch.
Choose the menu Switching→LAG→LACP Config to load the following page.
The following entries are displayed on this screen:
Global Config
LACP:
LACP Config
Port Select:
Select:
Port:
Admin Key:
System Priority:
Figure 7-7 LACP Config
Enable/Disable the LACP feature here.
Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select the desired port for LACP configuration. It is multi-optional.
Displays the port number.
Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
Specify a System Priority for the port. The System Priority and the
45