History Control; Event Config - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
pages.
14.3.1 History Control
On this page, you can configure the History Group for RMON.
Choose the menu SNMP→RMON→History Control to load the following page.
The following entries are displayed on this screen:
History Control Table
Select:
Index:
Port:
Interval:
Owner:
Status:
14.3.2 Event Config
On this page, you can configure the RMON events.
Choose the menu SNMP→RMON→Event Config to load the following page.
Figure 14-9 History Control
Select the desired entry for configuration.
Displays the index number of the entry.
Specify the port from which the history samples were taken.
Specify the interval to take samplings from the port.
Enter the name of the device or user that defined the entry.
Select Enable/Disable the corresponding sampling entry.
188
Advertisement
Table of Contents
