Desktop Installation; Rack Installation - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
3.2.1 Desktop Installation
To install the Switch on the desktop, please follow the steps:
1) Set the Switch on a flat surface strong enough to support the entire weight of the Switch with all
fittings.
2) Remove the adhesive backing papers from the rubber feet.
3) Turnover the Switch and attach the supplied rubber feet to the recessed areas on the bottom at
each corner of the Switch.
4) Upturn the Switch and connect it to the network devices while keep enough ventilation space
around.
5) Connect the Switch to power source with the provided power cord.
Note:
Please avoid any heavy thing placed on the Switch.
3.2.2 Rack Installation
To install the Switch in an EIA standard-sized, 19-inch rack, follow the instructions described
below:
1) Secure the supplied rack-mounting brackets to each side of the Switch with supplied screws,
as illustrated in the following figure.
Figure 3-1 Attaching Rubber Feet
10
Advertisement
Table of Contents
