Current Role
Role:
Role Change
Individual:
For an individual switch, the following page is displayed.
Figure 15-16 Cluster Configuration for Individual Switch
The following entries are displayed on this screen:
Current Role
Role:
Role Change
Candidate:
15.3.3 Member Config
When this switch is the commander switch of the cluster, via the commander switch you can
manually add a candidate switch to the cluster as well as remove the designated member switch
from the cluster. On this page you can configure and manage the member switch.
Choose the menu Cluster→Cluser→Member Config to load the following page.
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be individual
switch.
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be candidate
switch.
206