TP-Link TL-SL5428E User Manual page 232

4） Configure the port selected in the step above shown as the following Figure 16-5.
Configure Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1,
Flow control as None, and then click OK.
3. Download Firmware via bootrom menu
To download firmware to the switch via FTP function, you need to enter into the bootrom menu of
the switch and take the following steps.
1） Connect the console port of the PC to the console port of the switch and open hyper
terminal. Connect FTP server to port 1 of the switch.
2） Power off and restart the switch. When you are prompted that "Press CTRL-B to enter the
bootrom" in the hyper terminal, please press CTRL-B key to enter into bootrom menu
shown as Figure 15-6.
Figure 16-4 Select the port to connect
Figure 16-5 Port Settings
224