Storm Control - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
Port:
Ingress Rate (bps):
Egress Rate(bps):
LAG:
Note:
1.
If you enable ingress rate limit feature for the storm control-enabled port, storm control feature
will be disabled for this port.
2.
When egress rate limit feature is enabled for one or more ports, you are suggested to disable
the flow control on each port to ensure the switch works normally.
11.2.2 Storm Control
Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network.
If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be
automatically discarded to avoid network broadcast storm.
Choose the menu QoS→Bandwitdth Control→Storm Control to load the following page.
The following entries are displayed on this screen:
Storm Control Config
Displays the port number of the Switch.
Select the bandwidth for receiving packets on the port.
Select the bandwidth for sending packets on the port.
Displays the LAG number which the port belongs to.
Figure 11-8 Storm Control
124
Advertisement
Table of Contents
