Result Messages - Panasonic KX-UT248-B Administration Manual

Administration guide
Hide thumbs Also See for KX-UT248-B:
Table of Contents

Advertisement

1.1.6 Web User Interface Programming
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
FQDN field
The field cannot contain ", &, ', <, >, or trailing spaces.
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
Authentication ID/Password field
The field cannot contain ", &, ', :, <, >, or space.
The length of user password and administrator password must be from 6 to 16 characters.
Display Name field (® see [Display Name] in 4.6.2.1 Call Control)
This is the only field in which you can enter Unicode characters.

Result Messages

When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message
Complete
Failed (Parameter Error)
Failed (Memory Access
Failure)
Failed (Transfer Failure)
Failed (Busy)
Failed (Canceled)
26
Administrator Guide
The operation has successfully completed.
The operation failed because:
Some specified values are out of range
or invalid.
The operation failed because:
Access error to the flash memory
occurred while reading or writing the
data.
The operation failed because:
*1
A network error occurred during the
data transmission.
The operation failed because:
The unit is in an operation that
accesses the flash memory of the unit.
When attempting to import/export the
phonebook data, the unit is on a call.
While transferring the phonebook data,
a call arrived at the unit.
When updating the firmware, the unit is
on a call.
The operation failed because:
While transferring the phonebook data,
IP Reset was performed on the unit.
While transferring the firmware file, IP
Reset was performed on the unit.
While transferring the phonebook data,
the connection with the unit was
interrupted.
Description
Applicable Screens
All screens except
4.6.7 Export Phonebook
All screens
All screens
All screens
All screens
4.6.6 Import Phonebook
4.6.7 Export Phonebook
4.7.2 Local Firmware
Update
4.6.6 Import Phonebook
4.6.7 Export Phonebook
4.7.2 Local Firmware
Update
4.6.6 Import Phonebook
4.6.7 Export Phonebook
Document Version
2012-06

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Kx-ut113Kx-ut123Kx-ut133Kx-ut136Kx-ut248

Table of Contents