Value Range
Default Value
Configuration File Reference
4.5.4.5 Call Hold
Supports RFC 2543 (c=0.0.0.0)
Description
Value Range
Default Value
Configuration File Reference
4.5.4.6 CODEC Preferences
G722 (Enable)
Description
Value Range
Default Value
Configuration File Reference
G722 (Priority)
Description
Value Range
Default Value
Configuration File Reference
Document Version
2012-06
•
Yes
•
No
Note
•
If you select [Yes], DTMF tones will be sent in the SIP INFO
message. If you select [No], the method selected in [DTMF
Type] will be used.
No
DTMF_RELAY_n (Page 237)
Selects whether to enable the RFC 2543 Call Hold feature on this line.
•
Yes
•
No
Note
•
If you select [Yes], the "c=0.0.0.0" syntax will be set in SDP
when sending a re-INVITE message to hold the call. If you
select [No], the "c=x.x.x.x" syntax will be set in SDP.
Yes
RFC2543_HOLD_ENABLE_n (Page 238)
Selects whether to enable the G.722 codec for voice data transmission.
•
Yes
•
No
Yes
CODEC_ENABLEx_n (Page 231)
Specifies the numerical order usage priority for the G.722 codec.
1–255
1
CODEC_PRIORITYx_n (Page 231)
4.5.4 VoIP Settings [Line 1]–[Line x]
Administrator Guide
119