Udp_Con_Req_Addr_Notify_Limit; Network Settings; Ip Settings; Connection_Type - Panasonic KX-UT248-B Administration Manual

Description
Value Range
Default Value

UDP_CON_REQ_ADDR_NOTIFY_LIMIT

Value Format
Description
Value Range
Default Value

5.4 Network Settings

5.4.1 IP Settings

CONNECTION_TYPE

Value Format
Description
Value Range
Default Value
Phone User Interface
Reference
Web User Interface Reference
Document Version 2012-06
Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests sent
from the UDP Connection Request address and port, and only those
that do not contain the BINDING-CHANGE attribute.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
1–3600
30
Integer
Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
0–65535
0
Integer
Specifies whether to assign the IP address automatically (DHCP) or
manually (static).
Note
•
This setting is available only when "NW_SETTING_ENABLE" is
set to "N".
•
1 (DHCP)
•
0 (Static)
1
Configuring the Network Settings of the Unit (Page 19)
Connection Mode (Page 78)
5.4.1 IP Settings
Administrator Guide 189