4.7.2 Local Firmware Update
Value Range
Default Value
Configuration File Reference
Update Type
Description
Value Range
Default Value
Configuration File Reference
Firmware File URL
Description
Value Range
Default Value
Configuration File Reference
4.7.2 Local Firmware Update
This screen allows you to manually update the unit's firmware from a PC by clicking [Update Firmware].
146
Administrator Guide
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 175)
Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
•
Automatic
•
Manual
Automatic
FIRM_UPGRADE_AUTO (Page 176)
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
Max. 500 characters
Not stored.
FIRM_FILE_PATH (Page 176)
Document Version
2012-06