4.6.1 Call Control
Country Calling Code
Description
Value Range
Default Value
Configuration File Reference
National Access Code
Description
Value Range
Default Value
Configuration File Reference
Default Line for Outgoing
Description
Value Range
Default Value
Configuration File Reference
Flash/Recall Button
Description
Value Range
Default Value
Configuration File Reference
124
Administrator Guide
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters (consisting of 0–9)
Not stored.
COUNTRY_CALLING_CODE (Page 204)
When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Max. 8 characters (consisting of 0–9, *, and #)
Not stored.
NATIONAL_ACCESS_CODE (Page 204)
Specifies the line used to make an outgoing call when no line is
specified in the dialing operation.
Note
•
The available line number may vary depending on the type of
the unit being used.
1–2 (for KX-UT113/KX-UT123)
1–4 (for KX-UT133/KX-UT136)
1–6 (for KX-UT248)
1
DEFAULT_LINE_SELECT (Page 204)
Selects the function of the FLASH/RECALL button during a
conversation.
•
Terminate
•
Flash Hook
Terminate
FLASH_RECALL_TERMINATE (Page 242)
Document Version
2012-06