Annex_G_Stun_Enable; Annex_G_Stun_Serv_Addr; Annex_G_Stun_Serv_Port; Annex_G_Stun_User_Id - Panasonic KX-UT248-B Administration Manual

ANNEX_G_STUN_ENABLE

Value Format
Description
Value Range
Default Value

ANNEX_G_STUN_SERV_ADDR

Value Format
Description
Value Range
Default Value

ANNEX_G_STUN_SERV_PORT

Value Format
Description
Value Range
Default Value

ANNEX_G_STUN_USER_ID

Value Format
Document Version 2012-06
Boolean
Specifies whether or not the CPE can use STUN. This applies only to
the use of STUN in association with the ACS to allow UDP Connection
Requests.
•
Y (Enable)
•
N (Disable)
N
String
Specifies the host name or IP address of the STUN server for the CPE
to send Binding Requests.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
•
If the value for this setting is an empty string and
"ANNEX_G_STUN_ENABLE" is set to "Y", the CPE must use the
address of the ACS extracted from the host portion of the ACS
URL.
Max. 256 characters
Empty string
Integer
Specifies the port number of the STUN server for the CPE to send
Binding Requests.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
1–65535
3478
String
5.3.6 Management Server Settings
Administrator Guide 187