Enable Shared Call; Synchronize Do Not Disturb And Call Forward - Panasonic KX-UT248-B Administration Manual

Configuration File Reference

Enable Shared Call

Description
Value Range
Default Value
Configuration File Reference

Synchronize Do Not Disturb and Call Forward

Description
Value Range
Default Value
Configuration File Reference
Document Version 2012-06
VM_NUMBER_n (Page 239)
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE_n (Page 240)
Selects whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
•
You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
•
Yes
•
No
No
FWD_DND_SYNCHRO_ENABLE_n (Page 241)
4.6.2 Call Control [Line 1]–[Line x]
Administrator Guide 127