Resetting The Network Settings (Ip Reset); Resetting The Settings Made Through The Web User Interface (Reset Web Settings) - Panasonic KX-UT248-B Administration Manual

1.2.1 Reset
1.
Press or
Setting
2.
Press [#][1][3][6].
3.
Press [ ] or [ ] to select "Factory Setting", and then press [ENTER].
4.
Press [ ] or [ ] to select "Yes", and then press [ENTER].
5.
Press [ ] or [ ] to select "Yes", and then press [ENTER].
Notice
•
After performing Factory Setting, the unit will restart automatically. To avoid problems, it is
recommended that you save your settings before performing Factory Setting.

1.2.1.2 Resetting the Network Settings (IP Reset)

Performing IP Reset from the phone user interface restores the basic network settings made through phone
user interface programming, Web user interface programming, or configuration file programming to their factory
defaults. If the unit is unable to connect to the network after changing network settings, you can restore the
network settings to their factory defaults by performing IP Reset, and then try configuring the settings again.
Apart from Call Rejection Phone Numbers, all Web user interface and configuration file programming settings
will be reset to their factory defaults. However, settings such as the phonebook data, are not cleared by this
feature.
To perform this initialization, follow the procedure below:
1.
Press or
Setting
2.
Press [#][1][3][6].
3.
Press [ ] or [ ] to select "IP Reset", and then press [ENTER].
4.
Press [ ] or [ ] to select "Yes", and then press [ENTER].
5.
Press [ ] or [ ] to select "Yes", and then press [ENTER].
Notice
•
After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended that
you save your settings before performing IP Reset.
1.2.1.3 Resetting the Settings Made through the Web User Interface
(Reset Web Settings)
Performing Reset Web Settings from the Web user interface (® see 4.7.5 Reset to Defaults) resets the
settings made through the Web user interface to their default values.
When you use this feature, the unit will return to the status just after performing the most recent provisioning
or pre-provisioning.
Notice
•
After performing Reset Web Settings, the unit will restart automatically. To avoid problems, it is
recommended that you save your settings before performing Reset Web Settings.
Note
•
The settings configured through the phone user interface only will not be reset. However, settings that
can be configured through both the phone user interface and Web user interface will be reset.
30 Administrator Guide
.
Setup
.
Setup
Document Version 2012-06