CONFERENCE_SERVER_URI
Value Format
Description
Value Range
Default Value
Web User Interface Reference
FIRSTDIGIT_TIM
Value Format
Description
Value Range
Default Value
INTDIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
MACRODIGIT_TIM
Value Format
Description
Value Range
Document Version
2012-06
String
Specifies the URI for a conference server, which consists of "sip:", a
user part, the "@" symbol, and a host part, for example,
"sip:conference@example.com".
Note
•
In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part
("example.com" in the example above) can contain up to 127
characters.
•
Availability depends on your phone system.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Empty string
Conference Server URI (Page 123)
Integer
Specifies the length of time, in seconds, within which the first digits of
a dial number must be dialed. When this timer expires, the unit will play
a busy tone.
1–600
30
Integer
Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
1–15
5
Inter-digit Timeout (Page 123)
Integer
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5.5.1 Call Control Settings
Administrator Guide
203