Fwd_Dnd_Synchro_Enable_N; Resourcelist_Uri_N - Panasonic KX-UT248-B Administration Manual

FWD_DND_SYNCHRO_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

RESOURCELIST_URI_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2012-06
FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2,
..., FWD_DND_SYNCHRO_ENABLE_6
Boolean
Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
•
Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
•
You cannot set both "SHARED_CALL_ENABLE_n" and
"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.
•
Y (Enable Do Not Disturb/Call Forward synchronization)
•
N (Disable Do Not Disturb/Call Forward synchronization)
N
Synchronize Do Not Disturb and Call Forward (Page 127)
RESOURCELIST_URI_1, RESOURCELIST_URI_2,
..., RESOURCELIST_URI_6
String
Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
•
When the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons (KX-UT133/KX-UT136/KX-UT248 only).
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Empty string
Resource List URI (Page 128)
5.7.1 Call Control Settings
Administrator Guide 241