Http_Ssl_Verify; Cfg_Root_Certificate_Path - Panasonic KX-UT248-B Administration Manual

5.4.5 HTTP Settings
Value Range
Default Value
Web User Interface Reference

HTTP_SSL_VERIFY

Value Format
Description
Value Range
Default Value

CFG_ROOT_CERTIFICATE_PATH

Value Format
Description
198 Administrator Guide
Max. 40 characters
Note
•
An empty string is not allowed.
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP User Agent (Page 88)
Integer
Specifies whether to enable the verification of the root certificate.
•
0 (No verification of root certificate)
•
1 (Simple verification of root certificate)
•
2 (Precise verification of root certificate)
Note
•
If set to "0", the verification of the root certificate is disabled.
•
If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate's date, certificate's chain,
and the confirmation of the root certificate will be verified.
•
If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
•
If the unit has not obtained the current time, verification will not
be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
0
String
Specifies the URI of the root certificate.
Note
•
Changing this setting may require restarting the unit.
Document Version 2012-06