BELL_CORE_PATTERN4_TIMING
Value Format
Description
Value Range
Default Value
BELL_CORE_PATTERN5_TIMING
Value Format
Description
Value Range
Default Value
5.5.3 Telephone Settings
DISPLAY_NAME_REPLACE
Value Format
Description
Value Range
Default Value
NUMBER_MATCHING_LOWER_DIGIT
Value Format
Description
Document Version
2012-06
Comma-separated Integer
Specifies the cadence, in milliseconds, of pattern ID 4, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated by
commas.
0–5000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
300,200,1000,200,300,4000
Integer
Specifies the cadence, in milliseconds, of pattern ID 5, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2...) separated by
commas.
0–5000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
500
Boolean
Specifies whether the name saved in the phonebook is used in place
of the name display if a matching entry is found.
•
Y (Enable Display Name Replace)
•
N (Disable Display Name Replace)
Y
Integer
Specifies the minimum number of digits with which to match a
phonebook entry with an incoming call's caller ID. To specify exact
matching of entire numbers only, specify "0".
5.5.3 Telephone Settings
Administrator Guide
219