Auto_Call_Hold; Redialkey_Calllog_Enable; Onhook_Transfer_Enable; Disconnection_Mode - Panasonic KX-UT248-B Administration Manual

AUTO_CALL_HOLD

Value Format
Description
Value Range
Default Value

REDIALKEY_CALLLOG_ENABLE

Value Format
Description
Value Range
Default Value

ONHOOK_TRANSFER_ENABLE

Value Format
Description
Value Range
Default Value

DISCONNECTION_MODE

Value Format
Description
Value Range
Default Value

TONE_LEN_DISCONNECT_HANDSET

Value Format
Document Version 2012-06
Boolean
Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
•
Y (Enable Auto Call Hold)
•
N (Disable Auto Call Hold)
N
Boolean
Specifies whether the call log is displayed when the Redial button is
pressed while on-hook.
•
Y (Displays outgoing call log by pressing the Redial button.)
•
N (Not display call log by pressing the Redial button.)
N
Boolean
Specifies whether transfer operations are permitted while on-hook.
•
Y (Enable On-hook Transfer)
•
N (Disable On-hook Transfer)
Y
Integer
Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
1–2
–
1: Mode1 (ROT)
–
2: Mode2 (BT)
1
Integer
5.5.1 Call Control Settings
Administrator Guide 207