4.5.2 SIP Settings [Line 1]–[Line x]
SIP URI
Description
Value Range
Default Value
Configuration File Reference
4.5.2.2 SIP Server
Registrar Server Address
Description
Value Range
Default Value
Configuration File Reference
Registrar Server Port
Description
Value Range
Default Value
Configuration File Reference
Proxy Server Address
Description
Value Range
Default Value
Configuration File Reference
106
Administrator Guide
Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com".
Note
•
When registering using a user ID that is not a phone number,
you should use this setting.
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Not stored.
SIP_URI_n (Page 244)
Specifies the IP address or FQDN of the SIP registrar server.
Max. 127 characters
Not stored.
SIP_RGSTR_ADDR_n (Page 247)
Specifies the port number to use for communication with the SIP
registrar server.
1–65535
5060
SIP_RGSTR_PORT_n (Page 247)
Specifies the IP address or FQDN of the SIP proxy server.
Max. 127 characters
Not stored.
SIP_PRXY_ADDR_n (Page 246)
Document Version
2012-06