Making Calls; Basic Calling - Panasonic KX-HDV430 Operating Instructions Manual

3.1 Making Calls

3.1 Making Calls
This section explains the basic methods for making a call.
•
You can confirm that the number was dialed correctly before calling (Predialing) by entering the number,
then going off-hook.
•
To cancel dialing, press /
•
To insert a 3 second pause between phone numbers, tap "Pause".
It is useful when you want to operate voice mail service without listening to pre-recorded announcement,
for example. Repeat as needed to create longer pauses.
•
The "+" symbol (international dialing code) can be entered by pressing and holding the
•
You can select whether to make a voice call or a video call. If you make a call by going off-hook, the type
of call that is established depends on the "Call Mode" setting (KX-HDV430 only).
This icon is displayed only when configured on the telephone. Contact your administrator for further information.
*1

3.1.1 Basic Calling

Calling by Dialing
1.
In standby mode, go off-hook.
2.
Dial the outside party's number.
3.
Do one of the following:
a.
Tap "Voice Call" to make a voice call.
b.
Tap "Video Call" to make a video call (KX-HDV430 only).
4.
Go on-hook to end the call.
Note
•
You can use a specific line by pressing a function key assigned to a line (see "4.4.3 The Types of
Function Keys") or by using the Line Status screen (see "3.8 Checking the Line Status").
•
To dial a new number without going on-hook, follow the procedure below.
1.
During a conversation, press /
2.
Tap "Flash/Recall".
Predialing
In standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin the
call.
1.
In standby mode, dial while still on-hook.
2.
Do one of the following:
a.
Go off-hook.
b.
Tap "Voice Call" to make a voice call.
c.
Tap "Video Call" to make a video call (KX-HDV430 only).
The type of call that is established depends on the "Call Mode" setting (KX-HDV430 only).
*1
56 Operating Instructions
CANCEL .
MENU
*1
*1
.
key.
Document Version: 2017-08