Synchronizing With The Server - Motorola MC70 Integration Manual

Misc(3) Tab
Use this tab to configure various miscellaneous features.
Misc(3) Tab
Figure 4-12
Misc(3) Tab
Table 4-10
Field
Use DHCP server
Use DHCP bootfile

Synchronizing with the Server

When synchronization begins, the AirBEAM Smart Client attempts to open an FTP session using the AirBEAM
Smart Client configuration. Once connected, the client processes the specified packages. Packages are
loaded only if the server version of a given package is different from the version loaded on the client. When
upload completes, the AirBEAM Smart Client closes the FTP session with the server.
The AirBEAM Smart Client can launch an FTP session with the server either manually, when initiated by the
user, or automatically.
Manual Synchronization
Configure the AirBEAM Smart Client. See
1.
From the main AirBEAM CE window, tap
2.
window appears.
This check box control specifies whether the AirBEAM Smart Client uses the
DHCP response option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP
server to return the "TFTP server name" field (option 66). The special RF
network registry settings are included, but commented out, in the radio network
registry initialization files (essid_xxxx_yy.reg).
This check box control specifies whether the AirBEAM Smart Client uses the
DHCP response option 67 to specify the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the DHCP
server to return the "Bootfile name" field (option 67). The special RF network
registry settings are included, but commented out, in the radio network registry
initialization files (essid_xxxx_yy.reg).
Configuring the AirBEAM Smart Client on page
>
File Synchronize
Application Deployment for Mobile 5.0 4 - 23
Description
. Once connected, the AirBEAM Synchronize
4-17.