2 - 18 MC70 Integrator Guide
EDA Battery Charging
Figure 2-21
CAUTION
Ensure the EDA is fully inserted in the cradle. Lack of proper insertion may result in property damage or
personal injury. Symbol Technologies, Inc. is not responsible for any loss resulting from the use of the
products while driving.
Removing the EDA
To remove the EDA, hold back the release lever on the cradle and pull the EDA up and out of the cradle.
Release Lever
Removing the EDA
Figure 2-22
Charging the Spare Battery
Insert a spare battery to begin charging:
Lift the battery release lever.
1.
Release Lever