Motorola MC70 Integration Manual page 149

Signal Strength Window
Figure 7-36
After viewing the
Signal Strength
Signal Strength Status
Table 7-19
Field
Signal Displays the Relative Signal Strength Indicator (RSSI) of the signal transmitted
between the AP and EDA. As long as the Signal Quality icon is green the AP
association is not jeopardized. If the icon is red (poor signal), an association with a
different AP could be warranted to improve the signal. The signal strength icon
changes depending on the signal strength.
Status Indicates if the EDA is associated with the AP.
Signal Quality Displays a text format of the Signal icon.
Tx Retries Displays a percentage of the number of data packets the EDA retransmits. The
fewer transmit retries, the more efficient the wireless network is.
Missed Beacons Displays a percentage of the amount of beacons the EDA missed. The fewer
transmit retries, the more efficient the wireless network is. Beacons are uniform
system packets broadcast by the AP to keep the network synchronized.
Signal Level The AP signal level in decibels per milliwatt (dBm).
Noise Level The background interference (noise) level in decibels per milliwatt (dBm).
SNR The access point/EDA Signal to Noise Ratio (SNR) of signal strength to noise
(interference) in decibels per milliwatt (dBm).
window, tap the back button to return to the
Excellent Signal
Very Good Signal
Good Signal
Fair Signal
Poor Signal
Out of Range (no signal)
The radio card is off or there is a problem communicating with the radio card.
Wireless Applications 7 - 25
Wireless Status
Description
window.