Waking The Eda - Motorola MC70 Integration Manual

1 - 8 MC70 Integrator Guide
A clean boot resets the
must download the Clean Boot Package file from the Support Central and install on the
To perform a clean boot:
Download the Clean Boot Package from the Support Central. Follow the instructions included in the
1.
package for installing the package onto the
Simultaneously press the
2.
Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold
3.
the left scan button.
Insert the EDA into a powered cradle.
4.
The EDA updates and then re-boots.
5.
Calibrate the screen.
6.

Waking the EDA

The wakeup conditions define what actions wake up the EDA. These settings are configurable and the factory
default settings shown in
Wakeup Conditions (Default Settings)
Table 1-3
Status
Power Off
(Suspend Mode)
Auto Off
to the factory default settings. All data is the
EDA
button and the
Power
Table 1-3 are subject to change/update.
Description
When the EDA suspends by pressing
Power, these actions wake the EDA.
When the EDA suspends by an automatic
power-off function, these actions wake the
EDA.
Application
.
EDA
and keys.
1 9
1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC7004/94/95 only)
1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC7004/94/95 only)
folder is retained. You
.
EDA
Conditions for Wakeup