Battery Usage - Motorola MC70 Integration Manual

Transmit Power Dialog Box (Infrastructure Mode)
Table 7-15
Field
Automatic
Power Plus
Transmit Power Dialog Box (Ad-Hoc Mode)
Figure 7-28
Power Transmit Options (Ad-Hoc Mode)
Table 7-16
Field
Full Select
operating in highly reflective environments and areas where other devices could be
operating nearby, or when attempting to communicate with devices at the outer edge of a
coverage area.
30 mW Select
15 mW Select
5 mW Select
1 mW Select
with other devices in very close proximity, or in instances where you expect little or no radio
interference from other devices.
Tap to display the
Next

Battery Usage

Use the
Battery Usage
available: CAM, Fast Power Save, and MAX Power Save. Battery usage cannot be configured in Ad-Hoc
profiles.
Select (the default) to use the AP power level.
Automatic
Select to set the EDA transmission power one level higher than the level
Power Plus
set for the AP.
power for the highest transmission power level. Select
Full
to set the transmit power level to 30 mW.
30 mW
to set the transmit power level to 15 mW.
15 mW
to set the transmit power level to 5 mW.
5 mW
for the lowest transmission power level. Use this level when communicating
1 mW
dialog box.
Battery Usage
dialog box to select power consumption of the wireless LAN. There are three settings
Wireless Applications 7 - 19
Description
Description
power when
Full