Battery Charging Indicators - Motorola MC70 Integration Manual

Inserting the Spare Battery
Figure 2-23
Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up
2.
and to the rear of the cradle.
Release the battery release lever. The battery release lever locks the spare battery into place.
3.
To remove a spare battery, hold back the battery release lever and lift the battery from the spare battery slot.
Removing the Spare Battery
Figure 2-24

Battery Charging Indicators

The Vehicle Cradle charges the EDA's main battery and a spare battery simultaneously.
The EDA's charge LED indicates the status of the battery charging in the EDA. See
charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See Table 2-6 for charging status indications.
The standard battery fully charges in approximately four hours and the extended capacity battery fully charges
in approximately eight hours
Battery Release Lever
Extended Capacity
Battery Shown
Extended Capacity
Battery Shown
Battery Release Lever
Accessories2 - 19
Table 1-2 on page 1-6 for