Motorola MC70 Integration Manual page 146

7 - 22 MC70 Integrator Guide
Manage Profiles
Figure 7-32
Tap and hold a profile and select
the EDA uses the authentication, encryption, ESSID, IP Config, and power consumption settings configured for
that profile.
Editing a Profile
Tap and hold a profile and select
ESSID and operating mode for the profile. Use the
security parameters. See
Creating a New Profile
To create new profiles from the
Manage Profiles - Add
Figure 7-33
Select to display the
Add
address information, and power consumption level for the new profile.
Deleting a Profile
To delete a profile from the list, tap and hold and select
appears.
from the pop-up menu to set this as the active profile. Once selected,
Connect
from the pop-up menu to display the
Edit
Profile Wizard
Profile Editor Wizard on page
window, tap-and-hold anywhere in this window.
Manage Profiles
wherein you can set the profile name and ESSID. Set security, network
Profile Wizard
Profile Wizard
to edit the profile power consumption and
7-4.
from the pop-up menu. A confirmation dialog box
Delete
where you can set the