File Deployment - Motorola MC70 Integration Manual

4 - 12 MC70 Integrator Guide
Parameter State Indicators
The first column of the data table displays parameter state indicators. The state indicators display one of the
states in Table 4-2
Parameter Status Indicators
Table 4-2
Icon Indicator
Modified
Invalid
Window Status Bar
The SCM status bar found on the bottom right corner of the window contains the items in
right:
Window Status Bar Items
Table 4-3
Status Bar Item
Invalid Count
Modified Count
Device Type
Sample Status Bar
Figure 4-2
The sample status bar in
2 Modified Parameters.

File Deployment

The CPF file created by the SCM export function must be deployed to the EDA.
Optionally, use the Authenticode tools to sign the .cpf file.
1.
Make the .cpf file read-only, then copy it to the EDA.
2.
Tap the filename to install.
3.
Certain applications and settings require a cold boot to take affect. In these cases, cold boot the EDA.
4.
Refer to the Windows Mobile Version 5.0 Help file for more information.
for a particular parameter:
This parameter was changed from its initial factory setting.
This parameter is not valid for the selected device type. This can occur when a
configuration file for one type of device is loaded and the device type is changed
using the Device menu. Values marked "invalid" are not included in an exported.
Number of parameters not valid for the selected device.
Number of parameters modified from the factory defaults.
Device type - version.
Figure 4-2 shows that the current configuration file contains 1 Invalid Parameter and
Description
Description
Table 4-3 from left to