Attaching A Monitor - EUROCOM D870P MIRAGE User Manual

Advanced Controls
3
Function Key
Combination
You can use the FN +
F7 key combination to
toggle through the dis-
play options:
• LCD Only
• Monitor Only
• LCD + Monitor
Make sure you give the
displays enough time
to refresh.
Figure 3 - 6
Monitor Properties
3 - 10 Display Options

Attaching a Monitor

If you prefer to use a monitor or Flat Panel Display, connect it to the DVI-Out
port on the rear panel (see
a DVI to VGA converter.
"Rear View" on page 1 -
Vertical Refresh Rate
The vertical refresh rate of
your VGA monitor is important.
If it is too low and/or you're us-
ing fluorescent lighting, the
screen will appear to flicker. To
reduce flickering on a VGA
monitor, use faster refresh
rates (we recommend a re-
fresh rate of 72Hz or more).
But first check your VGA mon-
itor's documentation to make
sure it can support the rates
listed by the video driver. The
default refresh rate for VGA
monitors (without drivers) is
60Hz.
17). You may need to use