Table of Contents
Advertisement
Enabling Other Displays
Other displays are enabled from Display in the ATI Mobility Radeon 9700
Series... Properties Window
1.
Attach your external monitor to the DVI-Out port (or TV/HDTV to the S-
Video Out port), and turn it on.
2.
Go to the Advanced Display Settings (see
3.
Select the Displays tab (see
4.
Click the enable/disable button
use.
5.
Click Apply and an image will appear on the display device (give the
monitor a few seconds for the image to refresh).
6.
Click Yes to accept the settings and OK to save the changes.
7.
Select One display as Primary
Clone may operate in either Clone Mode, or Extended Desktop Mode).
(Figure 3 -
7).
Figure 3 - 3 on page
Figure 3 -
7).
/
for the display device you wish to
, the remaining as the Clone
Advanced Controls
Primary & Clone
Displays
The Primary display in
an Extended Desktop
3-5).
environment will be as-
sociated with display
Icon 1 in the settings
tab.
The Clone display will
set the associated dis-
play to show a copy of
(the
the Primary desktop.
The Clone display in
an Extended Desktop
environment will show
the portion of the desk-
top extended from the
Primary display.
Figure 3 - 7
Displays
Enabling Other Displays 3 - 11
3
Advertisement
Table of Contents
Need help?
Do you have a question about the D870P MIRAGE and is the answer not in the manual?