EUROCOM D870P MIRAGE User Manual page 83

13. One display will be set to 1 (Primary), and the other to 2 (Clone). The
displays may be switched as long as one as set to Primary.
14. To switch from Extended Desktop mode back to Clone mode, first
uncheck the tick box to disable the Extended Desktop (via the settings tab
in the Display Properties control panel) and click Apply (see
Desktop Monitor Arrangement" on page 3 -
15. Repeat the procedure in
sure you have selected the appropriate display to get all the ATI
Mobility Radeon 9700 Series.. Properties options tabs) to return to Clone
mode (click the /
14).
"Enabling Other Displays" on page 3 - 11
button to enable any displays if necessary).
Advanced Controls
Figure 3 - 10
Displays Tab
(Extended Desktop
"Extended
(make
Enabling Other Displays 3 - 15
3
Mode)