Attaching A Monitor (Crt) - EUROCOM D800P Dream Machine User Manual

Advanced Controls
3 Function Key
Combination
You can use the FN +
F6 key combination to
toggle through the dis-
play options:
• LCD Only
• CRT Only
• LCD + CRT
Make sure you give the
displays enough time
to refresh.
Figure 3 - 6
Monitor Properties
3 - 10 Display Options

Attaching a Monitor (CRT)

If you prefer to use a monitor (CRT) or Flat panel Display, connect it to the
External Monitor (CRT) port on the rear panel (see
20). You may need to use a DVI to VGA converter.
"Rear View" on page 1 -
Vertical Refresh Rate
The vertical refresh rate of
your CRT is important. If it is
too low and/or you're using flu-
orescent lighting, the screen
will appear to flicker. To re-
duce flickering on a CRT, use
faster refresh rates (we recom-
mend a refresh rate of 72Hz or
more). But first check your
monitor's documentation to
make sure it can support the
rates listed by the video driver.
The default refresh rate for
VGA monitors (without drivers)
is 60Hz.