Display Devices - EUROCOM D870P MIRAGE User Manual

Advanced Controls
3
Drivers
You are unable to use
most advanced con-
trols until the neces-
sary drivers
utilities are properly in-
stalled. If your system
hasn't been properly
configured (your ser-
vice representative
may have
done that for you), re-
fer to "What to In-
stall" on page 4 -
for installation instruc-
tions.

3 - 8 Display Devices

Display Devices
Besides the built-in LCD, you can also use an external monitor/flat panel dis-
play or TV/HDTV as your display device. The following are the display op-
tions:
1. The built-in LCD.
2. An external monitor connected to the DVI-Out port (may require DVI to VGA
and
converter).
3. A flat panel display connected to the DVI-Out port (may require DVI to VGA
converter).
4. A TV/HDTV (HDTV requires an HDTV converter) connected to the S-Video
Out port.
already
1,
If you are connecting both a monitor/flat panel display to the DVI-Out port, and a
cable/aerial to the optional TV Tuner module, make sure you attach the cable/
aerial to the TV Tuner first, then the monitor.
Monitor and TV Tuner