Configuring The Power Button - EUROCOM D870P MIRAGE User Manual

Configuring the Power Button

The power button may be set to send the computer in to either Standby or Hi-
bernate modes (Figure 3 -
green, in Hibernate mode the LED will be off. If you are in a power saving
mode set to save power through individual components (e.g. hard disk, mon-
itor), the LED will remain green.
Power Button
16). In Standby mode the LED
Lid
will flash
Suspend/Resume
(Sleep)Button
Power Schemes 3 - 23
Advanced Controls
Suspend/Resume
Button
You may also config-
ure the Suspend/Re-
sume key (Fn + F4)
from the menu illustrat-
ed in Figure 3 - 16. In
Windows this key is
referred to as the
Sleep button.
Figure 3 - 16
Power Options
(Advanced - Power
Buttons)
3