Speedstep™ Technology; Cd-Rw Module - EUROCOM 3400 UltraLite User Manual

Power: notes
1
2
3
4
5
6
7
8
5 – 14
H V
ARDWARE ARIATIONS
S S ™ T
PEED TEP ECHNOLOGY
If your system has a Pentium® III processor with SpeedStep™ technol-
ogy, you can save additional power. Refer to Chapter 4: Firmware, Power
Menu (page 4-13).
A
UTOMATIC
Adjust the CPU speed to "auto-
matic" (Power Savings is set to
"Customized"). This setting tells
the system to look at the power
source when it is turned on, or
when it resumes from Suspend
mode. If it detects an AC adapter,
the CPU will run at full speed, us-
ing more power. If the power
source is the battery, then the CPU
will run at a lower speed.
CD-RW M
ODULE
This module's "write" function uses considerably more power than
the normal "read" function. With this in mind, you should only write
CD-R disks when using the AC adapter.
S
WITCHING
If you're going from AC power to
battery, or vice versa, put the sys-
tem into Suspend mode for a few
seconds after you change the
power source. When you resume,
the system will re-examine the sys-
tem and change the CPU speed
accordingly.