Audio Setup - EUROCOM 3400 UltraLite User Manual

System: audio
1

Audio Setup

Note for Windows 95:
2
stall the USB & related Chipset drivers
(refer to page 2-18 of this chapter) be-
fore proceeding.
This procedure "updates" the de-
3
fault driver
Boot-up the system and Insert the
Device Drivers & Tools CD-ROM.
4
Windows 9x
1. Press +Break*> Device
Manager (tab) .
5
2. Highlight !PCI Multimedia De-
vice then click on the Remove
button to delete it.
6
3. Repeat this for !PCI Input Con-
troller (if it appears).
4. Click on the Refresh button.
7
5. If you're installing the audio
driver for the first time (instead
of upgrading), the Add New
8
Hardware Wizard will appear.
Choose the "Search for best
driver" option > Next>
† Note: For "specify location", Browse...
to the "audioMDC" or "audio" direc-
2 – 12
tory for your operating system on the
Device Drivers & Tools CD-ROM. Use
"audioMDC" if your system includes an
on-board modem. Use "audio" if it doesn't.
Y ou should in- 6. Click on Next or Finish as they ap-
pear and let the system load its
various drivers.
7. Click on OK to confirm the settings
and close System Properties .
8. Shutdown Windows and restart the
system.
Windows 2000
1. Press
> Device Manager (button) .
2. Highlight !PCI Multimedia Device
then choose "Uninstall" from the
"Action" menu to delete it.
3. Repeat this for !PCI Input Control-
ler (if it appears).
4. Click on Scan for Hardware
Changes in the "Action" menu.
5. If you're installing the audio driver
for the first time (instead of upgrad-
ing), the Found New Hardware
Wizard will appear.
Choose the "Search for suitable
driver" option > Next>
+Break*> Hardware (tab)
6. Check the "Optional Search Loca-
tion" box, then choose "specify a
location". †
7. Click on Next or Finish as they ap-
pear and let the system load its
various drivers.
8. Repeat as necessary for associ-
ated "hardware".
9. Close Device Manager (use the
"x" in the upper right corner).
10.Shutdown Windows and restart
the system.
Windows NT4.0
1. Open Control Panel> Multimedia
> Devices (tab) and click on the
Add... button.
2. Highlight "Unlisted or Updated
Driver" and click on OK.
3. Click on Browse... and navigate
to the NT4 "audioMDC" or "audio"
directory. †
4. Click on OK > OK.
5. Highlight the driver then click on OK.
6. Confirm the settings.
7. Close the Device Manager and
restart the system.
* +Break =
Start > Control Panel > System