EUROCOM 3400 UltraLite User Manual page 44

System: video
1
Video Setup
Before you Begin
2
If you are using Windows 9x,
make sure you've installed
Microsoft's DirectX7 (or later).
3
1. Insert the Device Drivers and
Tools CD-ROM.
2. Go to the Start menu,
4
Click on Run...> Browse...
3. Navigate to
D:\drivers\win98\DirectX\
5
(your language)\
DX70eng.exe*
or D:\drivers\win95\DirectX...
6
* The "DX70xxx.exe" file name reflects the
language (e.g. English = DX70eng.exe,
but Italian = DX70itn.exe).
4. Click on Open, Yes, or OK as
7
you follow the instructions.
You'll also have to restart dur-
ing the process.
8
2 – 10
Windows
Windows installs a basic all-purpose
video driver. To have full use of your
ATI Rage LT Pro AGP video chip, in-
stall its driver:
1. Insert the Device Drivers & Tools
CD-ROM.
2. Go to the Start menu,
Click on Run...> Browse...
3. Navigate to
D:\drivers\win95\video\setup.exe
or D:\drivers\win98\video\setup.exe
or D:\drivers\winNT4\video\setup.exe
or
D:\drivers\win2000\video\setup.exe
4. Click on Open, Yes, or OK as you
follow the instructions.
Note: During the installation you may have
to identify "disk1" or "disk2". In that case, use
the same directory.
5. When the installation is complete,
click on Finish to return to the
Adapter page (if asked).
(in Windows 9x ) Click on Moni-
tor> Change... (button) and
choose a "Laptop Display Panel"
(any size).
6. Click on OK and/or Close. When
prompted, close any other appli-
cations and click on Yes to allow
the system to restart.
7. If you're using Windows NT4.0 , re-
install Service Pack 4 (or later).
8. After rebooting, the "ATI Desk
Top Help" appears. Take a few
moments to learn about your
graphics accelerator 's en-
hanced features.