More On Setup; System Time & Date; Floppy Disk Controller; Primary Master - EUROCOM 3400 UltraLite User Manual

Firmware: setup – main menu
1

Switching Hard Disks

2
Every time you install a different
hard disk in the notebook, it
should be (re)configured, unless
3
Auto is selected.
4
5

Auto Limitations

The Auto feature may provide a
different set of parameters for the
6
same hard disk at different times.
However, it should be reconfig-
ured with the same parameters
7
you got the first time. If you use a
different set of parameters, it may
be impossible for you to read any
8
data on the hard disk.
4 – 6
M S
ORE ON ETUP
Following is additional advice on
portions of the Setup, not covered
in the Item Specific Help.
S T & D
YSTEM IME ATE
(M
The hour setting uses the 24-hour
system (i.e., ØØ = midnight; 13 =
1 pm). If you can change the date
and time settings in your operating
system, you will also change these
settings. Some applications may
also alter data files to reflect these
changes.
F D C
LOPPY ISK ONTROLLER
When this control is "enabled" you
can use a floppy disk drive either
in the Drive bay or the parallel con-
nection (with its adapter). This con-
trol does not affect an LS-120 drive.
P M
RIMARY
Pressing Enter opens the sub-
menu to configure the main IDE
HDD which
M )
AIN ENU
notebook's HDD bay. Refer to
Chapter 6: Extras for more on this
bay.
T
YPE (M M
AIN ENU
This setting has several options for
choosing which method Setup will
use to detect the hard disk:
Auto (Default setting) This allows
Setup to determine the hard
(M M )
AIN ENU
disk's type and other infor-
mation when you press En-
ter. It automatically loads
the information into the
BIOS.
NoneNo hard disk is installed.
With this option, the system
will require a removable disk
to supply the bootup infor-
mation.
ASTER
(M M )
AIN ENU
fits into the
>P M )
RIMARY ASTER