EUROCOM 3400 UltraLite User Manual page 122

Troubleshooting:
1
2
3
4
5
A
B
B
B – 8
LS-120, keyboard & PS/2 mouse
LS-120 D
I '
T DOESN T WORK
possible cause:
possible cause:
solution:
K
EYBOARD
U
NWELCOME NUMBERS APPEAR WHEN TYPING
possible cause:
indicator:
solution:
RIVE
You don't have one....ask your dealer for an upgrade.
The CMOS (Setup) configuration is wrong.
When the system starts, press F2 to get into the Setup .
Scroll down and make sure the "Secondary Slave" is
set to "LS-120". -If it doesn't register this information,
make sure the LS-120 drive is correctly seated.
Press F10 to Save and Exit, choose "Yes" and allow the
system to reboot.
The NumLock is turned ON.
The LED is lit.
Press and release the NumLock key.