Paper Feed (Pf) Roller Removal - Epson Stylus Color 1520 Service Manual

&2/25
EPSON Stylus 1520

3.2.10.12 Paper Feed (PF) Roller Removal

1. Remove the printer mechanism unit. (Refer to Section 3.2.6.)
2. Remove the paper eject frame. (Refer to Section 3.2.10.7.)
3. Remove the CR unit. (Refer to Section 3.2.10.9.)
4. Remove the base frame assembly. (Refer to Section 3.2.10.10.)
5. Remove 1 screw (CBP, 3X8) securing the paper eject drive unit to the left frame assembly. Then remove
the paper eject drive unit by lifting up the front edge. (Refer to Figure 3-25.)
6. Remove the trigger lever from the PF roller.
7. Remove the roller grounding spring that is in contact with the left frame assembly at the left end of the PF
roller.
8. Turn the right and left bushings to fit the cutouts on the right and left frames.
9. Remove 1 E-ring from the left end of the PF roller.
10. Slide the PF roller shaft left and disengage the PF roller gear (24) from the ASF transmission ratchet.
Then remove the PF roller.
Bushing
;
The gear 33.6 is highly precise. Do not touch the tooth with your bare hands and be careful not to
damage it.
3-30
Gear 24
PF Roller
Roller Grounding Spring
E-ring
Figure 3-28. PF Roller Removal
CAUTION
Trigger Lever
Gear 33.6
ASF Transmission
Rachet