Removing The Pf Roller & Paper Eject Roller Assy - Epson Stylus COLOR 760 Service Manual

EPSON Stylus COLOR 760
4.2.4.7 Removing the PF Roller & Paper Eject Roller Assy.
1. Remove the Upper Housing. (Refer to Section 4.2.1.)
2) Remove the Control Panel and Left Housing Panel.
3) Remove the Left Sub Frame.
4) Remove the ASF Assembly from the Printer Mechanism. (Refer to Section
4.2.4.5.)
5) Remove the CR Assembly. (Refer to Section 4.2.4.6.)
6) Remove three screws (No.1) securing the CR unit Guide Plate to the Top
Frame. Refer to Figure 4-48.
CR unit Guide Plate
No.1 Screws
Left Side of the Printer Mechanism
Figure 4-48. Removing the CR Unit Guide Plate
7) Remove five Upper Paper Guide Assemblies and one Right Upper Paper
Guide Assembly to the following directions, releasing their Torsion Springs
117.6 from the hooks on the Top Frame. Refer to Figure 4-49.
- Upper Paper GuideAssembly: Remove it backward.
- Right Upper Paper Guide Assembly: Remove it forward.
Disassembly and Assembly
No.1 Screw
Right Side of the Printer Mechanism
Disassembly Procedures
Back View
Torsion Spring 117.6
Upper Paper
Guide Assy
Figure 4-49. Removing the Upper Paper Guide Assembly
8) Remove Left Paper Guide sliding to left side, releasing the one hook from
the Top Frame. Refer to Figure 4-50.
One hook fixing the
Left Paper Guide
Figure 4-50. Removing the Left Paper Guide
Revision C
Front View
Right Upper Paper
Guide Assy
Left Paper Guide
103